More Filters
For the 36hp 77 bore, but can likely fit any 36hp bore. I only have two. _________________ My Paypal is the same as my email: [email protected]
I was able to purchase wholesale, driving down the price substantially. I've added some photos with the TP (black) and Genuine 911 for comparison. The neck area is narrower than the 911 for farther travel (more lift). Thorsten himself claims these can handle .571" (14.5MM), but I've seen examples of lifts beyond .600" in Type 4 applications. The foot of the adjuster is 10.0mm, .2mm wider than t...
I was able to keep the price low by purchasing wholesale. I have a limited number of these German-made 10MMx1.0 Type 4 adjusters. They are tool steel and because of the neck design can allow over .550" lift. These are arguably the finest adjusters available. $114 will get them to your door, if in the U.S. My PayPal info is below. _________________ My Paypal is the same as my email: [email prote...
I'll try to detail as much here: Tool steel 54 HRC hardness The coating is proprietary, but used for wear resistance Compatible with any brand cam Use these with .400" lobe lift or less. If you require more, I suggest going to Type 1 style 88 grams versus stock's ~110g Made in Germany Same working dimensions as stock No modifications needed For any Type 4 or WBX engine .9433" diameter $420 incl...
I'm currently making these tools and posted them onto our FB group. Still have some sets available and wanted to offer them here. They'll be shipping in about 4-6 weeks. Crank Holder Cam Pin Cam Wrench TDC Pin VANOS Air Tool Purchase here: BMW E39 M5 S62 Special Tools Kit - PRE-ORDER
I was able to drive the price down by purchasing wholesale. These are the latest batch, and I have a limited quantity. For T1 engines and T4 engines with the proper lifter bore sleeves. They weigh 56g, which is half the weight of typical lifters. They are compatible with all camshafts and do not require cam break-ins or 'burnishing', like normal lifters. They can also be used over and over with...
Hard to find factory tool kit for '74 to '79 Beetle. Kit is complete with rubber band. The plastic bag for these kits was often destroyed or discarded making it very hard to find. $70.00 v+ $5.00 shipping.
You will get the brand new spoke wrench that is pictured / This measures 4 1/8" long and is made of steel. This fits 6 sizes of spoke nipple. To get an order with combined shipping you must request and invoice before you pay. Contact us with any questions 661-877-7911 / 661-252-1174 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
SEE PICTURE....OEM DUCATI 2006 1000DS TOOL KIT...ALSO FOUND ON SOME...ST AND SS OR MONSTERS ...AT ANY RATE, CHECK THE ASSORTMENT ....OF DUCATI OEM TOOLS...BIGGER BAG SO YOU CAN PUT LOTS MORE TOOLS OF YOUR OWN CHOICE.......CHEEP PRICE...SOME STAINS ON THE BAG THAT SHOW UP ON THE PICTURE..THIS BAG PROBABLY CAN BE WASHED, BUT NOTE THE CONDICTION AS SHOW.........USE OUR HOTLINE NUMBER TO CHECK ITS ...
You will get the TDC tool that is pictured. This threads into a 14mm spark plug hole on any vehicle. The body is brass and measures 5/8" and is knurled for easy hand operated installation and removal. The piston slides up or down freely and has easy to read degree lines in red. This part is made in the USA. We combine shipping costs on multiple wins, so check out our ebay store. To get an order...
You will get the brand new UK Made universal pulling tool that is pictured. We combine shipping costs on multiple wins, so check out our ebay store. To get an order with combined shipping you must request and invoice before you pay. Contact us with any questions / 661-877-7911 / 661-252-1174 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active...
You will get the brand new camshaft gear extractor tool that is pictured. This is a very nice quality UK made tool and will work with Triumph 650 and 750 twins. This also fits 500 crankshaft pinion. We combine shipping costs on multiple wins, so check out our ebay store. To get an order with combined shipping you must request and invoice before you pay. Contact us with any questions / 661-877-7...
ROTATIONAL MOULDING TOOLING TO MAKE CUSTOM TEARDROP GAS FUEL TANKS FOR HARLEYS OR ANY CUSTOM MOTORCYCLES Cross-linked polyethylene and nylon was used to make these tanks LOWER BILLET ALUMINUM PETCOCK AND FUEL CROSSOVER BRACKETS ARE INCLUDED (APPROXIMATELY 40 PIECES) NOTE: LOWER STEEL TANKS MOUNTING TO FRAME BRACKETS ARE INCLUDED (APPROXIMATELY 10 KITS) FUEL/GAS CAPS IS NOT INCLUDED: AVAILABLE A...
Similar
Original used VW rockers have been modified to work with CB, EMPI, Porsche, and Thorsten Pieper swivel adjusters/Elephant's Feet. They've been cut down and dished with carbide endmills. This is the most professional-looking machining to correct rocker geometry available. These are difficult to modify in this fashion, and require fairly expensive cutting tools. The thrust surfaces are sanded smo...
Type 4 High Performance Parts 96mm cylinders (Non AA) - $240 a set Solid pinned rocker spacers - $50 Rocker endfloat shims - varies depending on thickness a quantiry - .004", .008, .011, .020", .040" Billet German higher flowing oil pumps - $300 Aluminum pushrod tubes - fits from stock to wider width engines - $110 Rocker milling for swivel adjusters - $80 Tool steel German 8mm or 10mm swivel a...
This is the perfect front mount license plate for F-Type. I had it on my lease, but have now returned the car. Check the amazon reviews to see how people like it: https://www.amazon.com/2014-Jaguar-Removable-License-Bracket/dp/B01092UW4W This bracket fits the 2013-2017 Jaguar F-Type and 2018-2019 F-Type SVR. Constructed of 5052 and 6061 aluminum, welded and anodized black, this bracket is built...
over a month agoBurbank, CA+9 milesAuto Parts for SaleOfferedReport Listing
VW Logo Radio Knobs Made by PEKALIT Part # on the back reads VW 111 035 371 but shows up in more searches if you look for 111035371 $100 or trade for a Torque Meister or Torque Dude multiplier tool, as long as it's NOT the one made by empi.
Ordering Policy Please verify the application before ordering the part using the Ebay Compatiblity tool but note that the tool may NOT be 100% accurate. IF you are not an expert and you do not know with certainty that the part you are ordering will fit your specific vehicle, please contact us BEFORE ordering. We can check your VIN (Vehicle Identification Number) to verify that the part fits you...
GENUINE PORSCHE PRODUCT Rebuilt* Porsche 911 S Oil Line Early 69 to 71 90110736200 *rubber body has been replaced with a NEW Cohline hose Technical Questions? You may contact us @ (323) 660-7674; We are at your service to answer all of your fitment questions. Please Note: Every attempt will be made to satisfy your fitment needs; however, the ultimate responsibility lies with you, The End User. ...
Forza Magazine set Starting with number one to 128. Thats 7.00 each. You are bidding on 128 magazines that were read once and stored in a non smoking home (some issues were never read). The magazines are in int to new condition. There are a few with shipping damage. I prefer locale pick up but I will ship. Please contact 818 541 9710 for shipping cost. I only charge cost. Powered by eBay Turbo ...
GENUINE PORSCHE PRODUCT NEW Porsche Porsche 911 Battery Trickle Charger 98061198000 EURO Fitment: All Technical Questions? You may contact us @ (323)-660-7674 . We are at your service to answer all of your fitment questions and needs. Please Note: Every attempt will be made to satisfy your fitment needs. However, the ultimate responsibility is dependent upon you, the buyer. Please be aware that...
GENUINE PORSCHE PRODUCT Used Porsche 993 Heat Exchanger BISCOFF 99321103907 & 99321104007 Fitment: 1994-1998 993 Technical Questions? You may contact us @ (323)-660-7674 . We are at your service to answer all of your fitment questions and needs. Please Note: Every attempt will be made to satisfy your fitment needs. However, the ultimate responsibility is dependent upon you, the buyer. Please be...
SECO CLUTCH KIT Containing Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing, and Alignment Tool as pictured, this kit is sourced from one or more world-renowned OE Manufacturers such as Aisin, Daikin/Exedy, Luk, Sachs, Valeo, or SECO, ideal for maintaining smooth engagement and reliability. For: 1988 - 1989 HONDA PRELUDE (2.0) eBay Product ID: EPID112919707 Cross Reference HO-100 061...
Your Listing Here
1 + ... Next >